RevPi Manager
Set up and run the dashboard on your Revolution Pi.
This guide is for everyone who works with the RevPi Manager dashboard. You do everything in your web browser. You don't need a terminal, SSH or any files on the device.
A few things are configured once during commissioning and are not part of everyday use: the connection to the platform, the AI assistant and problem reporting. Where to configure settings shows where to find each setting.
Get started
What it does
What the device reads, what it sends, and three things to know first.
Sign in
Open the dashboard, sign in, and find your way around.
Saving changes
Nothing takes effect until you save it. Here is how saving works.
Start page
View current readings, device status and notices at a glance.
Set up your connected equipment
Adding devices
Tell the dashboard which devices are fitted, one at a time or from a spreadsheet.
Devices
The device cards and what their status means.
Inputs & outputs
Configure the RevPi's ports: names, scaling and module layout.
Device pages
Energy meter, scale, Shelly relays, Siemens PLC and camera.
Sending to the platform
Choose which values go to the IoT platform, and how often.
Automations
Let the device switch outputs by itself with simple rules.